Quote:
Originally Posted by 1hdr4u
I recently took some photos of water drops without having to use a high speed shutter and just using my onboard flash. I had the shutter at the maximum allowed which is 1/250, but from what I am learning, I could use a lower speed shutter and still get the same results. Any helpful critique would be welcome.
|
Shutter speed is not important, as you will see from this photo. Shutter speed 1 sec.
However the power setting of the flash at 1/32 is very important. A low power setting increases the flash speed, but you do need a darkened room.
Harry