Quote:
Originally Posted by Lello
Don
The Yinyan was sold as a flash unit for the FZ30 (because of the voltage output) so it must be at very most 24 volts. I will see if I can find the paperwork for the yinyan to see if the trigger voltage is mentioned
|
If you can get hold of a voltmeter, you can check it yourself by measuring across the contacts with the flash turned on. If you do this though, be very careful not to touch the contacts or the meter's probes whist connected. I gave up measuring my old Panasonic flashgun's trigger voltage once it went past 300V DC. I still use it with a remote slave trigger though.