Quote:
|
Originally Posted by Don Hoey
As I am using an earlier version of Nikon Capture than Stephen I was able to see the histogram once the image was downloaded. I am attaching two screen shots of these, also one of the test JPG images. The final JPG image is in the Flash thread and the Nef ( RAW ) image is in my gallery.
The only negative I found was needing to midway exit NC and turn off the camera to allow the batteries to recover. As I was doing screen captures as well as dealing with the scene, the camera was on for quite a while. Battery power dropped to a point that the camera would not trigger, but a 10 minute switch off returned battery power to 90%.
Don
|
I notice an arrow above the LHS side of histogram. I assume histogram is a 'drop down' feature, if so there is a possibility I missed it. In Capture Control V4.04 there is a feature for to wake camera so I believe with this enabled camera should stand-by in the normal manner. I too lost a battery during my experience. I cannot check histogram in control as battery is currently charging!