Adjust the settings using the hardware based adjustment controls directly on the monitor. Get them as close as you can even if they aren't perfect. Remember that it's the contrast control that adjusts the white point and the brightness control that adjusts the black point. Having said that, turning down the brightness may well allow you to see the two shades of white on the contrast adjustment screen. By adjusting the two controls in a cycle of one after the other you should be able to get it right.
If you can't see the two shades of white, turn down the contrast to its minimum and if that still doesn't allow you to see the two bits of white turn down the brightness a long way until you can. Then fine tune on the contrast control.
As for the blue cast, what colour temp have you set the monitor to (on the monitor hardware)? 6500K is the norm.
D.
|