Hi again,
As promised, a quick update on the PSD.
I ordered a 80 GB Vosonic VP6230i (note the "i"), from good old Picstop. on Monday at about 1500 hrs and on Tuesday at 0930hrs PostmanPat knocked on my door with parcel. All the way from IOM and through the storm, what more could you ask for.
I sat down and read the manual and charged up the internal battery, and reread the manual.Dusted off the D2X and the D300 (both are set to jpeg-raw) and fired off about 30 images on each.Loaded card from D2X and got nice message, "format not recognised".Tried the card from D300, and got same message!!Formatted both cards and went to jpeg only, and cards from both cameras downloaded and images were viewable.
Tried jpeg+raw again still no transfer.Checked Vosonic forum and found a lot of unhappy canon/nikon raw users!!.Woe is me.
So contacted good old Picstop regarding the problem,they replied in 20 mins and advised to me to update to latest firmware and even gave link and how to do it bless them.
Updated firmware and banged out more jpeg+raws and inserted card, and yes it works a treat and very quick, and shows both images.
The 6230i comes with mains charger, ear phones, usb lead, av leads, driver for windows, instruction book, and a nice strong case for transporting it.
Size 3" wide x 5" high x 1" deep ( in mm 73 x 128 x 26 ) and weighs about 280 grms. After inital problems seems to be ok.
Thanks to those who shared their knowledge and well done Picstop.
regards Subzero.
|