Thread: Flash Diffusion
View Single Post
  #9  
Old 22-10-06, 14:05
Canis Vulpes's Avatar
Canis Vulpes Canis Vulpes is offline  
Senior Member
 
Join Date: Dec 2005
Location: United Kingdom
Age: 51
Posts: 4,398
Default

Quote:
Originally Posted by Don Hoey View Post
For future reference it would be nice to see a pic of the flash mounting in use on the stand.
The stand is terminated in a 3/8" thread (pic1) and the brolly/hot shoe adapter slides over and screws in to form a compression (pic2) by rotating the bottom tightener. A brolley is attached in a similar way by inserting through the hole at the top of pic2. Angle adjustment is made by the joint and released by the middle tightener. Pic 3 shows assembled with hot shoe flash foot. Flash shown assembled in pic 4 diffuser optional but I found provided softer light in both applications above. Additional flashes can be attached using the adapter in pic 5 when brolley shaft is placed through the hole and tightened. This is not perfect as the hole is too wide but it was packed with card to make in effect brolley shaft wider in diameter. SB-800 on remote cable was attached to adapter in pic 5 as has a 1/4" suitable for remote cord.
Attached Images
File Type: jpg 1.jpg (45.0 KB, 14 views)
File Type: jpg 2.jpg (47.7 KB, 17 views)
File Type: jpg 3.jpg (47.6 KB, 18 views)
File Type: jpg 4.jpg (52.1 KB, 22 views)
File Type: jpg 5.jpg (61.6 KB, 20 views)
Reply With Quote