WPF - World Photography Forum
Home Gallery Register FAQ Calendar Search Today's Posts Mark Forums Read

Welcome to World Photography Forum!
Welcome!

Thank you for finding your way to World Photography Forum, a dedicated community for photographers and enthusiasts. There's a variety of forums, a wonderful gallery, and what's more, we are absolutely FREE. You are very welcome to join, take part in the discussion, and post your pictures!

Click here to go to the forums home page and find out more.
Click here to join.


Go Back   World Photography Forum > Photography Equipment > Cameras


Cameras Discussion on Cameras of all types

Dust on SLR Mirror

Reply
 
Thread Tools
  #1  
Old 12-11-06, 17:18
Canis Vulpes's Avatar
Canis Vulpes Canis Vulpes is offline  
Senior Member
 
Join Date: Dec 2005
Location: United Kingdom
Age: 51
Posts: 4,398
Default Dust on SLR Mirror

We all know we may need to remove dust from a DSLR sensor but what do you do if dust or larger particles are found on the mirror and seen in viewfinder?
Reply With Quote
  #2  
Old 12-11-06, 17:32
Ian's Avatar
Ian Ian is offline  
Senior Member
 
Join Date: Dec 2005
Location: Bedfordshire
Posts: 1,305
Default

For any dust removal I remove lens, lock up mirror and very carefully put the vacuum nozzleto the lens housing for a few seconds and this seems to work fine.

Ian
__________________
I DON't suffer from Insanity
I enjoy EVERY MINUTE of it
Reply With Quote
  #3  
Old 12-11-06, 17:33
miketoll's Avatar
miketoll miketoll is offline  
Senior Member
 
Join Date: Dec 2005
Location: Suffolk
Posts: 7,477
Default

If it stays on the mirror and does not transfer to the sensor then it has no effect other than being annoying. I had this problem with my film SLR and in my ignorance just wiped the marks off with a lens cleaning cloth with no harm done. I would be a little more gentle now but if it annoys (which it would me) then I see no reason not to clean the mirror like a sensor. Marks can also become apparant on the screen that is above the mirror that the mirror comes up against when it flips up during an exposure. These marks will be more in focus than the ones on the mirror itself and are more likely I would have thought to be the ones you are seeing. Again they will not effect the photo and just carefully remove.

Last edited by miketoll; 12-11-06 at 17:38.
Reply With Quote
  #4  
Old 12-11-06, 21:42
yelvertoft's Avatar
yelvertoft yelvertoft is offline  
Guest
 
Join Date: Dec 2005
Location: North Essex, UK
Age: 59
Posts: 8,486
Default

I used to use a blower brush, but found the silvering to be very fragile. The silvering is on the front surface of an SLR mirror, not onthe back, protected by a layer of glass. Since making a problem much worse on a film SLR, I've given the body to a repair shop whenever I've needed dust removing.

I was very saddened to see my local camera repair shop had closed down recently. I don't know who I'll use next time I need a spruce up.
Reply With Quote
  #5  
Old 12-11-06, 21:48
miketoll's Avatar
miketoll miketoll is offline  
Senior Member
 
Join Date: Dec 2005
Location: Suffolk
Posts: 7,477
Default

Quote:
Originally Posted by yelvertoft View Post
I used to use a blower brush, but found the silvering to be very fragile. The silvering is on the front surface of an SLR mirror, not onthe back, protected by a layer of glass. Since making a problem much worse on a film SLR, I've given the body to a repair shop whenever I've needed dust removing.

I was very saddened to see my local camera repair shop had closed down recently. I don't know who I'll use next time I need a spruce up.
Guess I was really lucky but mainly its been the fresnel screen I've had to clean which is probably a bit more robust than the mirror.
Reply With Quote
  #6  
Old 12-11-06, 22:41
Don Hoey's Avatar
Don Hoey Don Hoey is offline  
Senior Member
 
Join Date: Dec 2005
Location: Norfolk
Posts: 4,462
Default

Duncan has said it about the silvering on the mirror. VERY VERY delicate. The most I have ever done is to sweep with a very fine brush. I would NOT advise using any form of liquid cleaning.

I think you are more likely to find dust that is visible in the viewfinder to be on the focussing screen itself. If the spots you see are sharp then they are on the screen and not the mirror. Just dirtied my F2 to prove accuracy of that statement. ( lunatic )
The fresnal part is very finely etched onto the underside and can attract dust. The top of the screen is a polished surface.

On the older F2 and F3 cameras with a removeable/interchangeable viewfinder dust on the screen was a regular hazard. No worries about changing lenses in dodgy conditions in those days, as the screens were removable and could be cleaned with a blower.

So first thing is to determine if dust is on the screen. Fairly sharp or sharp when looking through viewfinder. If looking at the mirror and you cannot grow spuds on it then most likely on the screen.

Don
Reply With Quote
  #7  
Old 12-11-06, 23:20
Christine's Avatar
Christine Christine is offline  
Senior Member
 
Join Date: Dec 2005
Location: Haverigg,South Lakes,Cumbria.Uk
Posts: 3,828
Default

A link on this Forum to Intemos.com proved very helful.They sell swabs and fluid which are very east to use,they provide very easy directions as to how to use.I clean all my sensors when they show lots of dark spots.I used to send my cams off to be cleaned,but if I can clean them,anyone can.
I did try with a blower,but made things worse.So now do a wipe clean with the swabs,and yes,it does work.
__________________
Christine
Avatar by Tracker(tom)
[COLOR="Blue

http://www.haverigg.com

http://www.birdforum.net/gallery/sho...00/ppuser/2356
Reply With Quote
  #8  
Old 13-11-06, 11:20
yelvertoft's Avatar
yelvertoft yelvertoft is offline  
Guest
 
Join Date: Dec 2005
Location: North Essex, UK
Age: 59
Posts: 8,486
Default

Quote:
Originally Posted by Don Hoey View Post
On the older F2 and F3 cameras with a removeable/interchangeable viewfinder dust on the screen was a regular hazard. No worries about changing lenses in dodgy conditions in those days, as the screens were removable and could be cleaned with a blower.
Don
Of course, if you've got a Pentax dSLR, you still can change the focusing screens.
Reply With Quote
  #9  
Old 13-11-06, 11:40
Canis Vulpes's Avatar
Canis Vulpes Canis Vulpes is offline  
Senior Member
 
Join Date: Dec 2005
Location: United Kingdom
Age: 51
Posts: 4,398
Default

Focus screens can be changed on D1 and D2 series DSLR's from Nikon. I have a large particle on the focus screen but thats no problem, I can remove and clean or employ a spec grabber. When cleaning the sensor I noticed dust on mirror also.

I recently purchased a used Nikon D2Hs as a second body, it remains a second body so I after reading advise here I am more inclined to leave the little dust on the mirror but remove the particle on focus screen.

Should it require service in future I shall stipulate its is cleaned, properly.
Reply With Quote
  #10  
Old 13-11-06, 11:51
sassan's Avatar
sassan sassan is offline  
Senior Member
 
Join Date: May 2006
Location: USA
Posts: 16,152
Default

Apart from delicate coating of mirror, I never trust myself to play around a moving part in camera or for that mater in most compact electronic devices.
No wonder my solution for mirror dust is "To tolerate".
__________________
S a s s a n .

------------------------------

"No one is going to take our democracy away from us. Not now, not ever.
" JOE BIDEN
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 20:12.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.