|
|
| Welcome to World Photography Forum! | |
 | Thank you for finding your way to World Photography Forum, a dedicated community for photographers and enthusiasts. There's a variety of forums, a wonderful gallery, and what's more, we are absolutely FREE. You are very welcome to join, take part in the discussion, and post your pictures!
|
|
|||||||
| Photographic Accessories Discussion on other Photography related Equipment. Tripods, Luggage and suchlike. |
 |
|
|
Thread Tools |
|
#1
22-12-05, 13:54
|
||||
|
||||
Tripod mount
Am I correct in thinking that the screw thread of the tripod mount is 1/4 BS WHITWORTH , cheers,Bert
|
|
#2
22-12-05, 14:08
|
||||
|
||||
|
Well 3/8 is more common on the better tripods but you do get 1/4 as well and a thread converter costs next to nothing.
cheers, Andy
__________________
Digiscoped.Com - Bird Photography Andy Bright.Com - Laughable Aviation Photography
|
|
#3
22-12-05, 14:13
|
||||
|
||||
|
Hi Andy, I meant the thread on the camera,made a cock up, bert
|
|
#4
22-12-05, 14:25
|
||||
|
||||
|
I have not explained myself very well so I will start again,
Am I correct in thinking that the screw thread of the tripod mount, on Dslr and 35mm camera's is 1/4 BS WHITWORTH,its the thread type I am after cheers,Bert
|
|
#6
22-12-05, 14:29
|
||||
|
||||
|
Hi Bert,
Yep 1/4 . I thought you mean't tripod legset to head. oops, beaten to it. cheers, Andy
__________________
Digiscoped.Com - Bird Photography Andy Bright.Com - Laughable Aviation Photography
|
|
#7
22-12-05, 14:44
|
||||
|
||||
|
I know its a 1/4 inch diameter,what I am after is the thread type,when we used imperial measurements there was two types of thread ,one was whitworth, and I can't remember the other? Camera equipment never changed to millimeters which is a different thread also, ie 1/4 inch = 6.35, I am reasonably sure its whitworth, bert
|
|
#8
22-12-05, 15:13
|
||||
|
||||
|
Yes Whitworth is the standard for cameras
__________________
Digiscoped.Com - Bird Photography Andy Bright.Com - Laughable Aviation Photography
|
|
#9
22-12-05, 19:20
|
||||
|
||||
|
I fell over this one when trying to modify a tripod head for a scope.
I always believed the thread to be Whitworth and cursed as I did not have a die. When I later made a sighting device the previous experience forgotten and needing to support the head in a vice, I rummaged for a screw to fit, job done. Only later, as the origional project is ongoing, did I check out that screw and cursed again. Seeing this brought it all back and I have just rechecked......... 1/4 x 20 UNC. the 3/8 thread is 3/8 x 16 UNC. Whitworth, BSF, UNC, UNF. The difference is in the thead angle. Whitworth and BSF 55deg. UNC and UNF 60deg. Metric is also 60deg. Don
|
|
#10
22-12-05, 19:46
|
||||
|
||||
|
Quote:
__________________
Digiscoped.Com - Bird Photography Andy Bright.Com - Laughable Aviation Photography
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
